Remote Auto Starter Operation
To Remote Start the Vehicle:
• Depress the “BLUE” button for approximately 1 to 2 seconds.
• The parking lights will activate to indicate the remote start received the signal.
• The ignition circuits will activate and the engine will start approximately [5] seconds later.
• Once the engine is running on remote control, the climate controls will activate and adjust the vehicles
interior temperature to your preset settings.
• The vehicle will run for the 14 or 21 minute cycle and automatically turn “OFF”.
To Turn Off the Remote Starter:
• Depress the blue start button for (3) seconds to turn “OFF” the engine.
4
Valet Mode and Emergency Disarm Procedure (Continued)
To Turn the Security Features Back On:
• Turn “ON” the ignition key.
• The system begins looking for the valet switch input data for 30 seconds.
• Switch the Valet switch to the “ON” position until the LED turns “OFF”. [for 2 seconds]
• Switch “OFF” the valet switch.
• Turn “OFF” the ignition key.
• The security system will now arm/disarm as you “LOCK/UNLOCK” the vehicle with the remote transmitter.
Automatic Door Locking and Unlocking Operation
We have incorporated special features to insure maximum driver/occupant safety while operating the
vehicle along with safeguards to prevent you from being locked out accidentally.
• The doors will “LOCK” when you depress the brake pedal. (Provided the ignition key is turned “ON”
and the doors are closed)
• The doors will “UNLOCK” immediately when the ignition key is turned “OFF”.
• If you stop to pick up or drop off a passenger, the doors will automatically re-lock upon the next
application of the brake pedal after the door is re-closed.
• The automatic door “LOCK/UNLOCK” feature does not operate in valet mode.
• The automatic door “LOCK/UNLOCK” feature can be programmed “OFF”.
LED Status Indicator and Violation Report
The LED indicator provides information on [7] modes of security system operation.
1. LED is “OFF” = Security system is disarmed.
2. LED is flashing steady = Security system is armed.
3. LED is flashing fast = Automatic arming timer is counting down.
4. LED is on solid with ignition key turned “ON” = Security system is in valet mode.
5. LED is flashing once every 5 seconds when ignition key is “OFF” = System is in valet mode.
6. LED is flashing in a [2] flash-pause sequence = System was triggered by the hood switch or a shock sensor.
7. LED is flashing in a [3] flash-pause sequence = System was triggered from an opened door.
Note: The [2] or [3] flashing-pause tamper alert memory will be cleared when you turn “ON” the ignition key.
When disarming if you receive [4] siren/horn chirps it indicates the alarm was triggered during your
absence.
START2 UM 3/5/02 2:31 PM Page 4
