background image

7

Alarm Feature Programming

To Enter Alarm Feature Programming Mode:

1. Turn “ON” the ignition key.

2. Toggle the Valet switch ON/OFF [6] times within 30 seconds after turning “ON” ignition.

3. The LED and parking lights will flash [6] times. The siren/horn will chirp [6] times.

4. You are now in alarm feature programming.

Chirp Status [Factory Default Setting is “ON”]

The siren/horn emits [1] chirp upon a remote lock and [2] chirps upon a remote unlock signal. You can

permanently program these chirps “OFF”, if desired:
To Turn the Chirps “OFF”:

• Depress the “LOCK” button. 

• The LED and parking lights will flash [2] times. The siren/horn will chirp [2] times.

To Turn the Chirps Back “ON”: [Factory Default Setting]

• Depress the “LOCK” button. 

• The LED and parking lights will flash [1] time. The siren/horn will chirp [1] time.

Last Door Automatic Arming [Factory Default Setting is “OFF”]

The alarm can be programmed to automatically arm and to lock or not lock the doors 30 seconds after

you exit the vehicle.
To Turn the Automatic Passive Arming “ON” and Automatic Passive Door Locking “ON”:

• Depress the “UNLOCK” button. 

• The LED and parking lights will flash [2] times. The siren/horn will chirp [2] times.

To Turn Automatic Passive Arming “ON” without Automatic Passive Door Locking:

• Depress the “UNLOCK” button. 

• The LED and parking lights will flash [3] times. The siren/horn will chirp [3] times.

To Turn Automatic Passive Arming Feature Back “OFF”: [Factory Default Setting]

• Depress the “UNLOCK” button. 

• The LED and parking lights will flash [1] time. The siren/horn will chirp [1] time.

Safety Illumination Sentinel System [Factory Default Setting is “OFF”]

This feature turns the parking lights “ON” for 12 seconds upon a lock signal and for 30 seconds upon an

unlock signal.
To Turn the Safety Sentinel Feature “ON”:

• Depress both the “LOCK” and “UNLOCK” buttons. 

• The LED and parking lights will flash [2] times. The siren/horn will chirp [2] times.

To Turn the Safety Sentinel Feature Back “OFF”: [Factory Default Setting]

• Depress both the “LOCK” and “UNLOCK” buttons. 

• The LED and parking lights will flash [1] time. The siren/horn will chirp [1] time.

START2 UM  3/5/02  2:31 PM  Page 7

Содержание START2-PLUS













Отзывы: