To Enter Miscellaneous Feature Programming:
1. Turn “ON” the ignition key.
2. Toggle the valet “ON” and “OFF” switch [15] times within 30 seconds after turning “ON” the ignition.
3. The LED and parking lights will flash [15] times. The siren/horn chirps [15] times.
4. You are now in miscellaneous feature programming mode.
Panic Feature Operations [Factory Default Setting Allows Panic At All Times]
Some states forbid the operation of a siren while a vehicle is operating. The module can be programmed
to prevent panic operations when the ignition is “ON”. In addition, the panic feature can be programmed
“OFF “ and no longer respond to the panic button of the transmitter, if desired.
To Prevent Remote Panic Activation when the Ignition Is “On”:
• Depress the “LOCK” button.
• The LED and parking lights will flash [2] times. The siren/horn will chirp [2] times.
To Prevent Remote Panic Activation At All Times:
• Depress the “LOCK” button.
• The LED and parking lights will flash [3] times. The siren/horn will chirp [3] times.
To Allow Remote Panic Activation At All Times: [Factory Default Setting]
Allows panic activation regardless if Ignition is “ON” or “OFF”:
• Depress the “LOCK” button.
• The LED and parking lights will flash [1] time. The siren/horn will chirp [1] time.
Door Unlock Pulses [Factory Default Setting Is Singe Pulse]
Some vehicles require [2] unlock pulses for the doors to unlock by remote control.
To Program the Module for [2] Unlock Output Pulses:
• Depress the “UNLOCK” button.
• The LED and parking lights will flash [2] times. The siren/horn will chirp [2] times.
To Program the Module Back To [1] Unlock Output Pulse: [Factory Default 1]
• Depress the “UNLOCK” button.
• The LED and parking lights will flash [1] time. The siren/horn will chirp [1] time.
Interior Light Activation Upon Disarm [Factory Default Setting Is “ON”]
The interior light activation feature upon disarm can be programmed “OFF” or back “ON”.
To Program the Interior Lights Activation “OFF”:
• Depress both the “LOCK” and the “UNLOCK” buttons at the same time.
• The LED and parking lights will flash [2] times. The siren/horn will chirp [2] times.
To Program the Interior Light Activation Back “ON”: [Factory Default Setting]
• Depress both the “LOCK” and the “UNLOCK” buttons at the same time.
• The LED and parking lights will flash [1] time. The siren/horn will chirp [1] time.
Miscellaneous Feature Programming
11
START2 UM 3/5/02 2:31 PM Page 11
