Carbatec TJ-X300C, Руководство пользователя

Страница: 12 / 45

Table Lock
urn the table lock (E) clockwise to lock the height adjustment handwheel (F) and
secure the planer table (C) in its selected position. urn the table lock (E)
counterclockwise to release and permit table adjustment.
Table Height Adjustment
he planer table height is set as
follows:
1. nlock the table lock (E).
2. otate the height adjustment
handwheel (F) clockwise to raise the
planer table (C), counterclockwise to
lower.
3. Lock the table lock (E). Each
revolution of the handwheel (F)
results in a
4mm up or down movement of the
table (C). A scale on the handwheel
column indicates the amount of
handwheel rotation. A pointer (B)
indicates the table position relative to
the cutterhead on the scale (A)
located on the side of
the cabinet.
Jointer Controls and Adjustments
eferring to Figure 6:
Outfeed Table Height Adjustment
Lock knob (C) and lifting handle (B)
control the height adjustment of
the outfeed table (A). he outfeed
table is initially adjusted at the
factory and should not be
repositioned except during certain
adjustments.
Infeed Table Height Adjustment
Lock knob (D) and lifting handle (E)
control the height adjustment of
the infeed table (F). o adjust:
1. Loosen lock knob (D).
2. aise the lifting handle (E) to
raise the infeed table for a shallow
depth of cut. Lower the handle for
a deeper cut.
3. ighten the lock knob (D). .