Carbatec TJ-X300C, Руководство пользователя

Страница: 8 / 45

sources of noise etc., e.g. the number of machines and the other neighbouring
procedures. Also the highest permissible levels of exposure may vary in different
countries. his information should help the machine user to evaluate the risk and
the risk rate in a better manner.
Features and Terminology
Receiving
Carefully unpack the machine and any loose items from the wood crate and inspect
for damage. Any damage should be reported immediately to your distributor and
shipping agent. Before proceeding further, read your manual thoroughly to
familiarize yourself with proper assembly, maintenance and safety procedures.
emove the screws that hold the machine to the shipping skid. emove the
protective coating from the table, bed rolls, feed rolls, cutterhead
and loose items packed with the machine. his coating may be removed with a soft
cloth moistened with kerosene. Do not use acetone, gasoline or lacquer thinner for
this purpose. Do not use solvents on plastic parts.
Unpacking
1. emove all contents from the shipping carton. Do not discard the carton or
packing material until the machine is set up and running satisfactorily.
2. Inspect the contents for shipping damage. eport damage, if any, to your
distributor.
Tools Required for Assembly
1 Accurate Straight Edge (approximately 2 ft)
1 Cross-point Screwdriver
1 4mm Hex Wrench (included)
1 5mm Hex Wrench