Carbatec TJ-X300C, Руководство пользователя

Страница: 5 / 45

while being machined.
- Never wear any loose working clothes.
- Do not work on the machine under influence of drugs or alcohol, and when you
are tired.
Safety regulations for operators
Do not put the machine into operation before you get acquainted with the contents
of the instructions for use.
- Make sure that electric cables are not damaged so that injuries caused by
electric current leaking (electric shocks) are avoided.
- Check regularly that safety covers are mounted properly and that they are not
damaged. epair damaged covers immediately or replace with other ones by a
qualified person.
- Do not put the machine into operation with the cover removed.
- Never use any tools that are distorted, broken or blunt.
- Always use the tool suitable for the work given, which corresponds to the
machine specifications. he tools, cutter blocks, must be in accordance with EN
847-1.
- eplace blunt tools as soon as possible , as blunt tools may cause injuries or
damage.
- Never use the tools at speeds higher than their recommended rated speeds by
the respective manufacturer.
- top all functions of the machines before replacing tools and pull out the plug
from the supply socket.
- Do not remove or interfere otherwise in safety devices such as covers, limit
switches
.
- hile handling parts above your possibilities, ask for helps from a qualified
person.
- It is not recommended to work on the machine during a storm.
Safety regulations for maintenance
Maintenance and repair must be performed by a qualified person. Do not do
maintenance work before you get acquainted with the instructions for maintenance
thoroughly.
- Before you start to perform any maintenance work, always turn off the switch
and pull out the plug from supply socket. A possibility of accidental putting the
machine into operation by another person is thus avoided.
- Any maintenance work on electric parts of the equipment may be done by a
qualified person only.
- Even if the machine is stopped, the power supply is not disconnected. Always
disconnect the plug from supply socket.
- Do not clean the machine or its peripheral devices even if the machine is
completely out of operation, unless the plug has been disconnected from supply