7
8
TOP
K
P8
P7
2017.01月
初
版
Mac
Illustrator
CS6
DC3000
Use the USB power socket alone. Overloading or splitting
the connection may lead to the abnormal generation of heat
or fire.
The total outlet amperage of the attached USB power socket
is a maximum 3.0A (amps). If the USB power socket is used
in combination with other products and the total outlet
amperage exceeds 3.0A, no electric power will be supplied
to the camera body. The maximum electrical power
consumption of this Product is approximately 800mA (at
DC12V).
The actual position of your car is determined by microwave
signals broadcast from GPS satellites. Without receiving
such signals, the precise position of your car cannot be
determined.
Using this Product near a TV antenna may cause a
deterioration in the reception sensitivity, flickering and/or
noise from the TV set.
Do not use the recorded images, videos and/or data for
illegal purposes.
In some cases, your recorded images, video and/or data
may constitute an infringement on the legal rights of a third
party. Car Mate takes no responsibility for any matters with
regard to, and arising from, the content of the images,
videos and/or data recorded on this Product.
This Product is not guaranteed to produce validity as
evidence for any accidents, or to identify the license plate,
model or color of any vehicle.
This Product is not guaranteed to record in any and all
circumstances.
Car Mate takes no responsibility for any loss arising from
the use or failure of this Product, or from any damage to
any recorded video and/or data.
Blinking or discoloration may make it difficult to distinguish
between recorded LED traffic lights.
Recording performance and time may vary depending on
the object being recorded, or on the ambient environment.
Recording quality may deteriorate at night, when backlit, or
when the ambient lighting changes sharply.
Keep the camera lens surface and all car windows clean.
Irregular light reflection and refraction caused by dust and
other foreign matter may affect recording quality.
To record in highest possible quality in darkness, ensure
you turn on the headlights or fog lights of your car.
In order to receive clear GPS signals, do not place
obstructive items around the Product.
When the Product is switched on, it may take time until it
starts receiving GPS signals. Allow between 30 seconds
to a few minutes, depending on the signal reception
environment, weather, vehicle conditions, and position of
the Product.
GPS signal reception may be hindered if the front
windshield of your car has been surface-treated with a
coating, etc.
Depending on the ambient environment or geographical
factors, the Product may not be able to adequately receive
GPS signals or receive GPS signals at all.
GPS satellites are controlled by the U.S. Department of
Defense and their accuracy is subject to change without
prior notice.
Do not use this Product near other GPS products or VICS
receiver units. Doing so may cause such products/units and
this Product to malfunction.
Some cars (such as those imported from overseas) are
designed to keep supplying electrical power to their cigarette
lighter receptacle, even with the engine turned off. If your car
falls into this category, unplug the Product when the engine
is turned off.
After the camera body is switched on, it may take up to
approximately 30 seconds to begin recording.
In some cars with a start-stop system, the supplied voltage
may be reduced in order to restore the electric power for
restarting the engine. Due to this, the power supply to this
Product may be stopped.
To prevent product failure, avoid exposing the camera lens
to direct sunlight for long periods of time.
If the surface of the lens has attracted dirt, sand, fingerprints,
etc., wipe clean using a dry, clean and lint-free cloth.
Due to the characteristics of the electrical components of
this Product, the surface/internal temperatures of the camera
may increase depending on the conditions of use.
When the ambient temperature exceeds the operating
temperature range, Product operation will be stopped for
protection.
If Product operation is stopped, resume operation once the
camera temperature has decreased.
Hold the connector portion of the power cable when
unplugging. A damaged power cable may cause electric
shock or fire.
To prevent possible product failure, use this Product only on
cars built with a DC12V negative earth electrical system.
This Product automatically switches between its three
operational modes by recognizing its electric power supply
source. Ensure you use only the add-on accessory products
included in this Product, or those sold separately. Some
third-party USB cables and USB power sockets may not be
compatible with this Product.
To prevent possible deformation or fire from occurring, do
not leave the camera body in areas where temperatures can
rise quickly, such as on the dashboard.
If the camera body has become hot after using it for long
amount of time, to avoid potential burns, do not allow it to
come into direct contact with your skin.
To prevent product failure, do not touch the terminals on the
camera body.
When cleaning the camera body, do not use solutions
containing abrasive compounds, alcohols, or organic
solvents.
Using
this Product
Safely
Preparation
Installation
Capturing
Images/V
ideo
V
iewing/Deleting
Media
Changing
Camera Settings
T
roubleshooting
Powering the Product
The GPS system
The camera body
Recording images, video and data
