35
36
p.28
-
-
-
-
-
-
-
-
-
-
-
-
p.22
-
24
p.28
p.36
p.22
-
24
-
-
-
-
-
-
-
-
-
-
p.22
-
24
p.37
-
-
-
-
-
-
p.25
-
26
p.30
p.32
-
34
p.23
p.28
p.28
p.22
-
24
p.14
p.26
ー
p.28
p.14
ー
p.20
p.7
p.20
p.7
TOP
K
P36
P35
2017.01月
初
版
Mac
Illustrator
CS6
DC3000
Using
this Product
Safely
Preparation
Installation
Capturing
Images/V
ideo
V
iewing/Deleting
Media
Changing
Camera Settings
T
roubleshooting
Troubleshooting
Continued on the next page
Problem
I cannot switch on
the camera.
(Driving mode/
Security mode)
*Check the power cable and USB power socket are properly connected.
*Check the camera body is not too hot. If the ambient temperature has exceeded
the operating temperature range, cool it down and try switching it on again.
*Check the battery pack is securely attached to the camera body.
*The switch button will not be active for approximately two seconds after
the battery pack is attached.
*Press and hold the switch button for more than two seconds with
the battery pack attached.
*Check the remaining battery. Charge if insufficient.
*Check the camera body is not too hot. If the ambient temperature has exceeded
the operating temperature range, cool it down and try switching it on again.
*Check the remaining memory on the memory card.
The “Manual Recordings” folder may be almost full.
*For Impact recordings, Security recordings, and Continuous recordings,
the most recently saved file overwrites the oldest file when their respective folder
becomes full. Ensure to back up any data you want to keep to an external storage device.
*Check the memory card for its speed class and capacity.
*Check the memory card for its speed class and capacity.
*This Product records the date and time based on world standard time.
When accessing the memory card with a computer, while the times may differ, this is not
considered product failure.
*The initial setting of the date and time may not have been completed. Keep the camera
switched on for at least 40 seconds outdoors where GPS signals can be easily received.
*As data is transferred wirelessly, transfer times can vary greatly depending on
the environment.
*Large files, especially videos recorded in 4K-equivalent, will take more time to transfer.
*During Driving mode and Security mode, the switch button cannot be operated.
*If this error occurs during action mode, the blinking orange light indicates the battery
is low. Please charge the battery pack.
I cannot switch on
the camera.
(Action mode)
I cannot record
video.
Recorded
data has been deleted.
Data seems incorrect
somehow.
Date/time are set
incorrectly.
Data transfer time to
my smartphone is slow.
An error (orange light is
blinking) occurs when
pressing and holding
the switch button.
Solution
Page
Red on
Below 19% memory remaining (“Manual Recordings” folder),
or no memory card inserted
Orange on
20% to 49% memory remaining (“Manual Recordings” folder)
Green on
50% to 100% memory remaining (“Manual Recordings” folder)
Indication
Memory LED
Switch button LED
Recording button LED
Communication
button LED
Page
Indication
Page
LED indicators
Green on
Continuous recording in progress
Orange blinking
Error
Red on
Impact/Manual/Security recordings in progress
Red blinks once
Still image capture
Orange on
Power is ON (20% to 49% battery remaining)*
Red on
*Action mode only
Power is ON (6% to 19% battery remaining)*
No light is on
Power is OFF, or
ON (during Security/energy saving mode)
No light is on
Orange blinking
Red blinking
Orange blinking
Red blinking
Orange blinking
Red blinking
Recording has stopped
Camera body is resetting
Camera body is being updated
Green on
Green blinking
Wireless LAN is ON
Communicating with smartphone
No light is on
Wireless LAN is OFF
Green blinking
Power is ON (Security/normal mode)
Orange blinking
Error (below 5% battery remaining)*
Green on
Power is ON
