22
21
1
3
2
1 minute
10 seconds
1 minute
M E M O
9
10
TOP
K
P22
P21
2017.01月
初
版
Mac
Illustrator
CS6
DC3000
Using
this Product
Safely
Preparation
Installation
Capturing
Images/V
ideo
V
iewing/Deleting
Media
Changing
Camera Settings
T
roubleshooting
While checking the app display on your connected smartphone,
adjust the lens angle.
Once you have determined your ideal lens angle, hold knob I
firmly by hand so as not to let it turn, and turn knob II to fix
the lens in place.
Adjusting the lens angle
After fixing the lens angle, turn off your car engine (turn off the ignition).
This completes the camera installation.
Turning off the engine
*The memory LED will
also light up.
Knob I
Knob II
Lens angle and recorded footage
Adjust the lens angle depending on your preferred recording field of view. (See images below)
When the lens faces the driving direction, the camera will record most of the road traffic ahead.
Adjusting the lens angle to face inside the car will allow the camera to record the inside of the car,
and the traffic behind it.
Please set according to preference.
<Lens facing the driving direction>
Driving direction
Back of
the car interior
<Lens facing directly below>
<Lens facing the inside of the car>
Capturing images/videos in Driving mode
Capturing images/videos
By turning on your car engine (turning on the ignition), the camera is
automatically switched on to begin continuous recording.
Ensure all LEDs are on within a few seconds of starting the engine.
*It may take up to 30 seconds for the camera to begin recording after being switched on.
Turning on the engine to switch on the camera
In Driving mode, the four types of recording modes can be used as follows.
On the memory card, one folder will be created for each recording mode. Captured/recorded files are
recorded in their respective folder together with geotagging (geographical identification metadata).
●Capturing scenery
●Capturing the inside
of your car
■Manual Recording
The camera starts and stops recording either by pushing the record
button on the camera body, or by switching it on using
your smartphone. One file is saved every minute. When the folder
becomes full, the camera stops recording automatically.
■Impact Recording
When the camera detects an impact, it stores the footage from 10 seconds
before and 10 seconds after (20 seconds total). When the folder becomes full,
the most recently saved file overwrites the oldest file.
*The manual recording mode supersedes
the impact recoding; in the manual mode, the camera will not record any footage even if an impact is detected.
■Still image capture
The camera takes one still image by switching it on using your smartphone.
While the folder is full, you cannot take any more still images.
*You cannot take any still images by pushing the button on the camera body.
*You cannot take any still images while the camera is in manual recording mode.
*You cannot take any 4K equivalent still images while the camera is in driving mode.
■Continuous recording
The camera records video continuously from the moment
the car engine is turned on until it is turned off. One file is
saved every minute. When the folder becomes full, the most
recently saved file overwrites the oldest file.
*The camera will not record continuously in manual recording mode.
●Capturing
any potential
road incidents
●Capturing
still images
●Recording
continuous
footage
Recording
By turning off your car engine (turning off the ignition), the camera is automatically switched off.
Ensure all LEDs have turned off within a few seconds of stopping the engine.
Turning off the engine to switch off the camera
