Canworld CDE500 Series, Руководство пользователя

Страница: 157 / 284

CDE500 Vector Control AC Drive Chapter 6 Parameters Description
Table 6- 11 Relation table of analog value and pulse output
Value Function Range
0 Setting frequency 0~Max frequency(b0.00)
1 Running frequency 0~Max frequency(b0.00)
2 Output current 0~2 times motor rated current
3 Output voltage 0~1.2 times motor rated voltage
4 Output power 0~2 times motor rated power
5 Output torque 0~2 times motor rated torque
6 AI1 0V~10V
（
or 0~20mA
）
7 AI2 0V~10V （ or 0~20mA ）
8 AI3 0V~10V （ or 0~20mA ）
9 X6/FI 0.00kHz~100.00kHz
10 Target torque 0~2 times motor rated torque
11 PID setting 0.0%~100.0%
12 PID feedback 0.0%~100.0%
13 PID output 0.0%~100.0%
14 Actual length 0~Sett length(E7.07)
15 Count value 0~Set count value(E7.05)
16 Communication setting 0.0%~100.0%
17 Feedback frequency 0~Max frequency(b0.00)
C3.04 Range: 11~22 Default: 21
AO curve
selection
AO curve specified the relationship between the output percentage and
analog output signal.
Provide two AO curves. Parameters’ edit according to digit
1: AO curve 1(Two points,Refer to
C3.05
～
C3.08 )
2: AO curve 2(Four points,Refer to C3.09
～
C3.12 )
Unit’s digit: AO1 Ten’s digit: AO2
C3.05 Range: 0.00~10.00 Default: 0.00
AO curve 1
minimum output
Unit: V
Define AO curve 1 minimum output value. When chose the 0~20mA
current input, 0mA corresponding to the 0V, and 20mA corresponding to
10V.
C3.06
Range: 0.0~ C3.08 Default: 0.0
Corresponding
setting of AO
curve 1 minimum
output
Unit: %
The relationship between AO curve 1 minimum input signal and the
percentage of set value.