Cantek C12RSH, Руководство по эксплуатации

Страница: 7 / 37

SRS-12H MANUAL Chapter 1: Introduction
2
1-2 FEATURES
PRECISION-PROCESSED FEED CHAIN AND GUIDE TRACK
The feed chain block and guide track are made of special cast iron. The high-
grade steel connecting pin are heat-treated and ground for maximum durability.
EIGHT PRESSURE ROLLERS HOLD THE WORKPIECE
STABLY
Eight pressure rollers arranged in six rows on both sides, the front and rear of
sawblade and supported by hinges so that they are smooth and stable in motion.
PRECISION-BUILT SAW ARBOR MOUNTING
Made of nickel-chrome steel, through heat-treated, accurately ground and
dynamically balanced, it runs on precision angular-contact ball bearings which
eliminate any radial run-out and axial thrust at high speed of 4500 r.p.m. and
then ensure accuracy of sawblade and workpiece profile.
POWERFUL ARBOR DRIVE MOTOR
Saw arbor is driven with a motor by means of V-belts. There are 3 choices on
saw motor: 7.5HP, 10HP or 15HP, depending on work requirement.
VARIABLE FEEDING SPEEDS
The feeding speed can be adjusted variably at any speed between 17~40 Meter
per minute, easy to operate.
RIGID CABINET CONSTRUCTION
Cabinet machine base is welded with steel plate. The rigid structure ensures
the strength and stability of the machine.
MOVABLE AND FIXED ANTI-KICKBACK FINGERS
The unique design of auto-adjust anti-kickback fingers to be installed between
the first and the second rollers. This anti-kickback fingers will always retain
at the most safe position while raising or lowering pressure rollers. The
operators need not to adjust the fingers. Also, the first row of upper anti-
kickback fingers is independently mounted on an overarm hanger, and one row
of bottom anti-kickback fingers is fitted in front of feed chain.
These three rows of anti-kickback fingers and lateral safety guard prevent the
operator from the dangers of workpiece kickback, ensure the operator’s safety
completely.