Cantek C12RSH, Руководство по эксплуатации

Страница: 25 / 37

SRS-12H MANUAL Chapter 4: SAFETY PRECAUTIONS
20
danger zon e
C
L
ripping line
To operate this machine incorrectly might cause danger to people (the operator),
therefore we strongly request the operator complies with the following safety
guidelines:
;
The operator must read the operation manual very carefully, before handling
the machine.
;
A qualified operator must take enough training and have the related working
experience.
;
The saw arbor rotation of this machine is 4500 r.p.m. and the power used is
7.5~15HP.
The workpiece that fed by chain takes a large of reacting force
during ripping. If the pressure rollers could not hold down the workpiece
properly, the workpiece will kick back anytime and hurt the operator. To
prevent the accident, the pressure rollers must be adjusted to a proper position
while changing the thickness of workpiece. (see page 13)
;
As the sawdust will be stuck between the anti-kickback fingers to influence
their function, it is necessary to clear the sawdust from them very often.
Before operate the machine, be sure the anti-kickback fingers are not stuck
with any sawdust or other substances.
;
The operator should wear leather gloves and leather apron, and should stand
at the side of the machine. Never stand in line with the sawing line. The
danger zone includes the angle of 30 degree both sides of sawing line.
;
Never touch, either directly or indirectly, any moving parts of the machine
while operation, and workpiece which is presently being sawed.
;
Before sawing, the workpiece should be cleared of any foreign objects such
as metal, sand, coal cinder and earth.
;
Never feed two or more pieces of planks into the machine at the same time.