Cantek C12RSH, Руководство по эксплуатации

Страница: 30 / 37

SRS-12H MANUAL Chapter 5: MAINTENANCE & REPLACEMENT
25
◎
The wood should be cleared of any foreign objects such as metal, sand and
soil etc… before ripping. Those objects will also damage the feed chain and
guide track.
◎
Pay attention to the dust extracting apparatus all the time to ensure the
maximum efficiency of dust-collection is being maintained.
◎
At the same time as performing the machine's regular lubrication checks,
clean away dust and sawdust from all parts of the machine.
◎
The operator must make a maintenance record. Do the time maintenance
exactly to protect the machine.
5-2 LUBRICATION
Regular lubrication is essential to maintain the lifespan and optimum performance of
the machine. The following inspections and lubrications should be performed at the
time intervals specified or required.
* Every day:
Check the oil level in the feed chain lubrication tank each day before operation
and fill it up if necessary. If the lubricant insufficient indicator lights up
during operation, the machine will stop running automatically. Please add the
required lubricant immediately. When pouring oil into the tank, the operator
must take care not to allow any impurities objects (eg. sawdust…) to get inside.
Be sure to use the good quality of lubricant to ensure an effective lubrication on the
machine running. We suggest using the lubricant offered by the machine
manufacturer or its agents.
※
When stores the lubricant, it is very important to always keep it clean.
Never use the polluted lubricant.
※
The recycled oil is prohibited.
This machine is equipped with Electric lubricator.
Take off the arrowed “oil filler cap” and then pour in oil for 80% full. Be
sure not to let the oil be overflowed, otherwise sawdust and wood chips will
stick on the lubricator easily.
Electric Lubricator: