Cantek C12RSH, Руководство по эксплуатации

Страница: 31 / 37

SRS-12H MANUAL Chapter 5: MAINTENANCE & REPLACEMENT
26
Mechanical Lubricator
：
* Every 2400-2500 working hours:
After every 2400-2500 working hours, the operator should use a grease gun to add
grease to the bearings of the saw arbor. Before lubrication, the nozzle of grease gun
should be cleaned completely at first, to avoid any impurity object following the
grease into the bearings and damage them.
◙ Please check the position of oil nozzles on the machine as the pictures below:
1. Open the saw arbor cover and take off the saw blade. There is one oiling nozzle
located on the top of the outer shell of saw arbor.
2.
Open the saw arbor pulley cover, there is one oiling nozzle located on the bottom
of the outer shell of saw arbor.