Cansec Webster 64, Руководство по установке

Страница: 3 / 32

Webster 64 Page 3 of 32
Installation Manual February 2024 • Rev. 1.1
Introduction
Cansec Systems’ Webster 64 controller incorporates a mini-computer called the
Panel Logic Module (PLM) utilizing Ethernet connectivity and an Input Output
Module (IOM) which incorporates a 64-bit processor in this new architecture. This
allows for a fast, high capacity access control system with a lower cost per
reader/door system implementation. The Webster 64 architecture has the ability to
flash applications and firmware updates into the control panel using the Ethernet
connection.
The standard Webster 64 controller is available in 2 or 4 doors from the factory.
However, additional controllers like MAPmini, MAP1 and MAP2 controllers can
be added and governed by the Webster 64 controller to increase the number of
door capacity.
The Webster 64 controller allows for 5,000 individual cardholders. The readers can
be Cansec’s CanProx One Proximity Readers (AWID or HID card technology) or
one of many other popular Wiegand readers.
Note: Must have l atest approved PLM and IOM firmware version for compatibility to this document.

255 Access Schedules

Supports 5,000 individual user card IDs

Supports up to 64 doors using a combination of MAPmini, MAP1 or MAP2
controllers that must be provisioned in First Access mode.

Supports Door Contact and RTE connection per reader/door

Ease of future software/firmware upgrades

System management via web interface
Key Features