Cansec Webster 64, Руководство по установке

Страница: 10 / 32

Webster 64 Page 10 of 32
Installation Manual February 2024 • Rev. 1.1
Panel Installation
CONTROLLER POWER CONNECTION
Note: See Note 1 in Appendix section for suggested power supplies & backup battery.
The Webster 64 requires an external battery backed-up 12 VDC power supply.
However, as many devices can be attached to the Webster 64 controller, it may be
more cost effective to use a separate power supply (battery backed-up) just for the
Webster 64 Controller and a separate power supply which can be sized to supply
the amount of current that the attached high-current devices (locks) will require.
Figure 3
Mode Indicator : After a complete power up PM1 LED is ON, PM2 LED is OFF, IOM LED flashes
once every second. The PLM LED flashes waiting for a host connection and stays steady
when a connection is established. Webster 64 emits 2 beeps to indicate operating mode.
2 Beeps –
Webster
Note: Continuous beeps indicate power issue. Refer to
Power Issue section for more information