MAPMINI
Page 14 of 28
Installation Manual
September 2021 • Rev. 1.4
Magnetic Lock Wiring – Up To 6 Amp, 30VDC MAX
IMPORTANT:
In some jurisdictions, the use of a UL approved power supply and
connection to the fire alarm system for emergency release may be required. Installers
should contact the local authority having jurisdiction to verify the specific
requirements. Also, a building permit may be required in some jurisdictions for the
installation of magnetic locks.
Figure 11
See Note 2 in
Appendix section for
6 Amp relay rating
Note:
A diode can cause slow
release of the magnetic lock. It is
better to use a MOV device. Some
magnetic locks have built-in MOV
devices; in that case no diode or
additional MOV is required. Check
with magnetic lock supplier.
Note
: See Electric Strike Lock Wiring section
for explanation of MF relay usage.
