Cansec MAPMINI Controller, Руководство по установке

Страница: 13 / 28

MAPMINI Page 13 of 28
Installation Manual September 2021 • Rev. 1.4
LOCK OUTPUT AND MULTI-FUNCTION RELAY WIRING
 Electric Strike Lock Wiring – Up To 6 Amp, 30VDC MAX
The Multi-Function (MF) relay is configured by the user through the host software.
This relay can be set to only one of the following options:

Alarm Shunt – ( factory default ) Shunt the alarm system before opening lock.

Door Held Open – Door has been left open.

Forced Entry – Door opened without access-granted or exit-button-press event.

Door Operator_All – Activated on all cards (Lock Opens first).

Door Operator_HC – Activated on only Handicap cards (Lock Opens first).

DHO and Forced Entry – Activated on either DHO or Forced Entry.
Figure 10
See Note 2 in Appendix section for 6 Amp relay rating