Cansec MAPMINI Controller, Руководство по установке

Страница: 22 / 28

MAPMINI Page 22 of 28
Installation Manual September 2021 • Rev. 1.4
9. Unselect Enable DHCP . Consult with IT personnel and enter the IP address,
Subnet Mask, Gateway IP Address and Port numbers.
Caution : The optional Trusted Host IP (see Figure 21) instructs the panel to accept data
connection only from the host computer where the First Access software is installed.
Other connections for diagnosis and updating are not limited by this Trusted Host IP.
10. The factory default or current password for a new unconfigured MAPMINI
panel is
Cansec . The password must be changed to something else other than
Cansec .
11. Click Save . The panel saves the new settings and reboots for the settings to take
effect.
Figure 18
Use Trusted Host IP with
caution. If the IP Address of
the host computer is changed
then the host computer
cannot connect to the panel
until the Trusted Host IP
option in the panel is
updated with the new IP
address of the host computer.
Figure 20