H1000
Page 13 of 45
Installation Manual
Oct 2015 • Rev. 2.6
Onboard LEDs
H1000 panels are equipped with a number of LEDs that indicate various processes.
HOST COMMUNICATION LEDS
Figure 3: RS-485 Communication LED
The host communication LEDs are labeled LED2 and LED3. The H1000
transmitting LED2 will flash between GREEN and OFF, and receiving LED3
will flash between RED and OFF. These two LEDs are active when the panel is
communicating with the host computer.
FIRMWARE STATUS LEDS
When the H1000 is correctly operating, the LED4 (labeled BD STAT,
see Figure
2:
I)
will be flashing RED & OFF once a second.
Note
: During a H1000 firmware upgrade, the LED4 will be on solid RED.
Firmware upgrades are achieved using the HFLASH Utility.
