Canon XF200 Скачать руководство пользователя страница 154

Страница: 154 / 246

Clip Operations

154

• If you selected [Select], use the joystick to move between the clips. Press SET to select a clip to copy and

repeat as necessary (up to 100 clips). After selecting all the desired clips, press the MENU button.

3 Select [OK] and then press SET.

• All the applicable clips on the selected CF card will be copied to the other CF card.

• Select [Cancel] instead to cancel the operation.

• While the clips are being copied, you can press SET to cancel.

4 When the confirmation message appears, press SET.

NOTES

• You cannot copy a clip if either CF card slot cover is open.

• If a clip is being copied to a card that already has a clip with the same number (the last 4 digits in the clip

name), the copied clip will be renamed with the following number.

Deleting Clips

You can delete any clip except for MXF clips with an

mark. To delete such clips, delete the

mark

beforehand.

Deleting a Single Clip

1 Select the desired clip and then press SET to open the clip menu.

2 Select [Delete Clip] (MXF clips) or [Delete] (MP4 clips) and then press SET.

• You will be prompted to confirm the operation. For MXF clips only, the clip information will be displayed on

the screen as well.

3 Select [OK] and then press SET.

• Select [Cancel] instead to cancel the operation.

• While the clip is being deleted, the operation cannot be canceled.

4 When the confirmation message appears, press SET.

Deleting Multiple Clips

1 Open the [Delete] submenu.

[

Other Functions]

[Clips]

[Delete]

2 Select [Select] to select which clips to delete or [All] to delete all the

clips and then press SET.

• If you selected [Select], use the joystick to move between the clips.

Press SET to select a clip to delete and repeat as necessary (up to
100 clips). After selecting all the desired clips, press the MENU button.

3 Select [OK] and then press SET.

• All the applicable clips on the selected recording media will be deleted.

• Select [Cancel] instead to cancel the operation.

• While the clips are being deleted, you can press SET to cancel.

4 When the confirmation message appears, press SET.

Operating modes:

[

Other Functions]

[Clips]

[Delete]

COP

Содержание XF200























































































































































































































































Результаты поиска

Содержание XF200

Отзывы:

Похожие инструкции для XF200

Бренды по названию

Популярные бренды

Canon XF200, Инструкция по эксплуатации

Результаты поиска

Содержание XF200

Отзывы:

Похожие инструкции для XF200

Бренды по названию

Популярные бренды