Canon XF200, Инструкция по эксплуатации

Страница: 151 / 246

151
Clip Operations
Eng
lis
h
Using the Clip Menu
1 Select a clip and then press SET.
• The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press SET.
• The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
• Press the CANCEL button instead to return to the previous index screen.
IMPORTANT
• Observe the following precautions while any access indicators are illuminated or flashing in red. Failure to do
so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the CF card slot cover or the SD card slot cover of the recording media being accessed and do
not remove the recording media.
Displaying Clip Information
Select [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen).
Push the joystick left/right to switch to the previous/next clip. When you are finished, press the CANCEL button
to return to the MXF clip index screen.
* For clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed.
Operating modes:
10
4 6 7
1
2
3
9
11
14
15
16
17
18
12
13
5 8
1 Thumbnail of the selected clip
2 Thumbnail of the previous clip
3 Thumbnail of the next clip
4 Shot mark (
A
110, 157)
5 Clip geotagged with GPS information (
A
111,
114)
6 Special recording mode (
A
118)
7 Currently selected CF card slot (
A
41)
8 Clip number / Total number of clips
9 Recording date and time
10 Clip name (
A
49)
11 Bit rate and resolution (
A
55)
12 Frame rate* (
A
55)
13
$
mark /
%
mark (
A
110, 152)
14 Embedded custom picture file (
A
135)
15 Time code of the clip thumbnail
16 Time code of the first frame in clip
17 Time code of the last frame in clip
18 Clip duration
COP
Y