Canon WFT-E1, Руководство по настройке сети

Страница: 19 / 124

19
W
2
In
fra
str
uctu
re
M
od
e
This section explains the minimal setup required to transfer images using a wireless LAN
access point with infrastructure mode. For detailed installation and setup procedures for a
wireless LAN access point, please read the instruction manual for the wireless LAN
access point or contact the manufacturer of the wireless LAN access point.
Terms used in this section may differ depending on the manufacturer of the wireless LAN
access point.
The high-speed transfer mode developed by the manufacturer may destabilize
communication, so it is recommended not to use it.
Operating mode, wireless mode, 802.11 mode, and other modes fall under this category.
Select
“802.11b”, “802.11g”, or “Automatic.”
It is also known as the “ESSID.”
Enter a
series of alphanumeric characters (up to 36 characters) .
If a string is already entered, you do not need to change it.
Enter the same SSID in the WFT-E1.
Encryption and other items fall under this category.
Set up
“WEP” as the minimum security.
Enter the encryption key set for WEP in the WFT-E1.
If authentication can be selected, set it to “Open.”
When using WPA-PSK authentication, use the TKIP encryption method. The WFT-E1
does not accommodate the AES encryption method.
Setting Up the Wireless LAN Access Point
Selecting a Wireless LAN Standard
Setting the SSID
Setting Security
COP
Y