Canon PIXMA MX870 Series, Руководство по обслуживанию

Страница: 13 / 66

ink tank.
(Applicable ink
tank icon) Printing with an empty ink tank can damage
the machine.
To continue printing without replacing the ink
tank(s), press the Stop button for 5 sec. or
longer to disable the function to detect the
remaining ink amount. After the operation, it
is recorded in the machine that the function to
detect the remaining ink amount was disabled. - Logic board
Non-supported
hub. [2002] --- An unsupported
USB hub is
connected.
Remove the hub. Remove the applicable USB hub from the
PictBridge (USB) connector. - PictBridge board
- Logic board
Document cover
not closed. [2800] --- The feeder cover is
open. Close cover
and press [OK]. Close the document cover, and press the OK
button. - DF unit
- DF switch unit
Paper jam in the
ADF. [2801] --- Document in ADF.
Redo operation
after checking
document in ADF
and pressing [OK]. Remove the paper from the ADF, and press
the OK button. - DF unit
No paper in the
ADF. [2802] --- No document in
ADF. Press [OK]
and redo operation
after setting
document. Press the OK button to clear the error. - DF unit
Paper in the ADF
is too long. [2803] --- Document size is
too long. Redo
operation after
checking document
on ADF and
pressing [OK]. Remove the paper from the ADF, and press
the OK button. - DF unit
Duplex printing
not available with
the paper in the
ADF. [2804] --- Document size not
suitable for two-
sided scanning.
Press [OK] to
cancel operation
and discharge
document. Remove the paper from the ADF, and press
the OK button. - DF unit
Time-out for the
scanner device. [2700] --- Timeout error has
occurred. Press
[OK]. The buffer became full in the middle of
scanning operation, and 60 minutes have
elapsed since then, making re-scanning
unstable. Press the OK button to clear the
error.
10 / 63