Canon MULTIPASS C75 Скачать руководство пользователя страница 76

Страница: 76 / 212

6-8

Speed Dialling

Chapter 6

Using Coded Speed Dialling

To use this feature, you must first register a number for coded speed dialling.
(

p. 6-6)

Follow this procedure to send documents using coded speed dialling:

Open the document tray.*

Adjust the document feed lever for the
document you are loading. (

p. 4-2)

Prepare the document and load it, face

Ex:

down, in the ADF. (

p. 4-4)

• For colour sending, press Colour/B&W

(Currently used memory)

to turn on its light. (

p. 7-2)

• To adjust the resolution and contrast,

pp. 7-3, 7-4.

(Standby to scan)

Press Coded Dial.

Use the numeric buttons to enter the two-digit

Ex:

code assigned to the number you wish to fax.

• The number registered under that coded speed

Ex:

dialling code is displayed.

• If you enter the wrong code, press Stop. Then

press Coded Dial and enter the correct code.

•

NO TEL #

appears if no fax number is

assigned to the coded speed dialling code you
entered.

Press Start to begin scanning for sending, or
wait a few seconds for the unit to begin
scanning automatically.

• If you prefer the unit never to scan a

document automatically after a few seconds,
disable the

TIME OUT

setting. (

p. 14-6)

• You can also use coded speed dialling to send a document to more than one destination

at a time. (

p. 7-13)

• To dial a telephone number registered for coded speed dialling, simply lift the handset,

press Coded Dial, and enter the two-digit code.

TEL=03 3758 2111

DOCUMENT READY

MEMORY USED 0%

* Hong Kong, Singapore, and Malaysia only.

Содержание MULTIPASS C75





















































































































































































































Результаты поиска

Содержание MULTIPASS C75

Отзывы:

Canon MULTIPASS C75, Руководство пользователя, Страница: 76 / 212

Результаты поиска

Содержание MULTIPASS C75

Отзывы: