Canon MULTIPASS C75 Скачать руководство пользователя страница 160

Страница: 160 / 212

13-4

Troubleshooting

Chapter 13

Jams in the Multi-Purpose Tray

If print media jams in the multi-purpose tray, the LCD displays

CLEAR PAPER JAM

Follow this procedure to clear the jam:

You do not need to unplug the unit when clearing paper jams.

Close the document tray if necessary.*

Gently pull any jammed paper out of
the unit as shown.

• You can hold the document tray up for easy

access to the jammed paper.**

Remove the paper stack from the multi-
purpose tray and reload it. (

p. 2-16)

• Make sure the stack does not exceed the

paper limit mark (

Press Resume to start the operation
again.

• If you are printing from a Windows

application, follow the instructions displayed
by the software on your PC.

If the paper jam occurred while a fax was being received into the unit’s memory, that fax
will print automatically when the jam is cleared and you press Resume.

* Hong Kong, Singapore, and Malaysia only.

** Australia and New Zealand only.

Содержание MULTIPASS C75





















































































































































































































Результаты поиска

Содержание MULTIPASS C75

Отзывы:

Canon MULTIPASS C75, Руководство пользователя, Страница: 160 / 212

Результаты поиска

Содержание MULTIPASS C75

Отзывы: