Canon MULTIPASS C75 Скачать руководство пользователя страница 201

Страница: 201 / 212

Appendix B

Handset

B-3

Handset

Attaching the Handset to Your Unit

Follow this procedure to attach the handset to your unit:

Use two of the screws provided to attach
the handset cradle to the cradle support.

• Push the screws in with your finger or use a

cross-point screwdriver. Make sure the
screws are inserted all the way in.

Before attaching the cradle support to
your unit, remove the BJ cartridge.

• To remove the cartridge follow steps 1 to 5

on pages 12-12 and 12-13.

• Store the BJ cartridge in the BJ cartridge

container provided with your unit.

Disconnect the power cord from your unit.

Turn the unit on its side and while
supporting it, use a screwdriver to
remove the two covers on the bottom of
the unit.

Support the unit and use the remaining
two screws provided to attach the cradle
support to the unit.

• Push the screws in with your finger or use a

cross-point screwdriver. Make sure the
screws are inserted all the way in.

• Make sure you support the unit when

inserting the screws.

Содержание MULTIPASS C75





















































































































































































































Результаты поиска

Содержание MULTIPASS C75

Отзывы:

Canon MULTIPASS C75, Руководство пользователя, Страница: 201 / 212

Результаты поиска

Содержание MULTIPASS C75

Отзывы: