Canon MULTIPASS C75 Скачать руководство пользователя страница 144

Страница: 144 / 212

12-6

Maintenance

Chapter 12

Clean the shaded area of the operation
panel.

• Dirt and dust particles that collect on the

underside of the operation panel affect the
quality of the documents you copy or send.

Use a clean, soft, dry, lint-free cloth
to wipe up paper dust from the areas
(shaded) surrounding the separation
roller.

When you are finished, close the
operation panel by pressing it down from
the centre.

• Be sure to close the operation panel until it

locks into place, or the unit will not function
properly.

Close the document tray.*

Reconnect the power cord.

Cleaning the Rollers

You may need to clean the unit’s rollers after using a package of high resolution paper.
This process removes paper dust from the unit’s rollers, preventing paper feed
problems. For details,

p. 5-11.

SEPARATION ROLLER

* Hong Kong, Singapore, and Malaysia only.

Содержание MULTIPASS C75





















































































































































































































Результаты поиска

Содержание MULTIPASS C75

Отзывы:

Canon MULTIPASS C75, Руководство пользователя, Страница: 144 / 212

Результаты поиска

Содержание MULTIPASS C75

Отзывы: