Canon MULTIPASS C75, Руководство пользователя, Страница: 108 / 212

8-6
Receiving Faxes Chapter 8
Setting the Options for Fax/Tel Mode
If you set
Fax/Tel Mode
, you can control precisely how the unit handles incoming calls
by adjusting the following settings:
• Adjust the time the unit takes to check whether a call is from a fax machine or a
telephone ( RING START TIME setting).
• Adjust the length of time the unit rings when the call is a voice call ( F/T RING TIME
setting).
• Set whether the unit switches to receive mode after the ring time set in
F/T RING
TIME
has elapsed (
DEFAULT ACTION
setting).
n
You can also set these options from the MultiPASS Suite. (
1
Software User’s Guide)
■
What Happens When Fax/Tel Mode is Selected
Telephone Fax Fax
Sending document
manually
Sending document
automatically
The unit answers without ringing.*
The unit listens for the fax tone.
(For 8 sec.)
The fax tone
is detected.
The fax tone is not detected.
The document is
received automatically.
The unit starts ringing.
Pick up the
handset to talk.
If you don’t pick up the handset
(within 22 sec.).
DEFAULT ACTION
Choose between:
RECEIVE
(factory default setting) and
DISCONNECT
.
DISCONNECT
RECEIVE
(Factory default setting)
(The fax tone is
detected and the unit
switches to receive
mode.)
The unit disconnects
the call.
Not all fax machines are capable of sending a fax tone. For those cases
if you set the
DEFAULT ACTION
to
RECEIVE
, the unit switches to receive
mode automatically and starts receiving the document. If no document
comes in, it disconnects the call after approximately 40 seconds.
F/T RING TIME
(Factory default
setting = 22 sec.)
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
* Australia only: After answering, the unit plays “You are connected. Please hold.”