Canon MULTIPASS C75 Скачать руководство пользователя страница 49

Страница: 49 / 212

Chapter 4

Document Handling

4-3

Document

Handling

■

Problem Documents

• To prevent document jams in the ADF, do not use any of the following:

– Wrinkled or creased paper

– Carbon paper or carbon-backed paper

– Curled or rolled paper

– Coated paper

– Torn paper

– Onion skin or thin paper

• Remove all fasteners (staples, paper clips, etc.) before loading the document into the

ADF.

• Make sure any glue, ink, or correction fluid on the document is completely dry before

loading it into the ADF.

• If you have a document that will not feed properly into the ADF, make a photocopy of

the document and load the copy instead.

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document.
Make sure your document’s text and graphics are within this area.

MAX. 4.5 mm

MAX. 4.0 mm

MAX. 4.0 mm
COLOUR FAX: MAX. 6.0 mm

MAX. 4.5 mm

Содержание MULTIPASS C75





















































































































































































































Результаты поиска

Содержание MULTIPASS C75

Отзывы:

Canon MULTIPASS C75, Руководство пользователя, Страница: 49 / 212

Результаты поиска

Содержание MULTIPASS C75

Отзывы: