Canon MultiPASS C530, Руководство по обслуживанию

Страница: 171 / 243

3-14
MultiPASS C530/C560 Chapter 3: Maintenance & Service
"DATA ERROR"
Cause:
The registration data in the SRAM was destroyed and a checksum error occurred
due to a dead lithium battery or SRAM failure.
Solutions:
(1) Press the
Set
button, and turn the power off and on again.
(2) Replace the lithium battery.
(3) Replace the SPCNT board.
"DOC. TOO LONG" (#003)
Cause: The document is longer than 39.4"(1m).
Solution:
Use a copy machine to make a reduced copy of the document. Then send again.
Cause:
It took more than 32 minutes to send or copy a document. It took more than 32
minutes to receive a document.
Solution: Divide the document and send or copy each part separately. Contact the other
party. Have them divide the document and send each part separately.
"HANG UP PHONE"
Cause:
The handset or the extension telephone is off the hook.
Solution:
Put the handset or the extension telephone back on the hook.
"INSTALL BC-21e"
Cause: You tried to make color copies with a BC-20 Black BJ cartridge installed.
Solution: Remove the BC-20 Black BJ cartridge and install the BC-21e Color or BC-22e
Photo BJ cartridge.
Cause:
You tried to print a received color fax with a BC-20 Black or BC-22e Photo BJ
cartridge installed.
Solution: Remove the BC-20 Black BJ cartridge or BC-22e Photo BJ cartridge and install
the BC-21e Color BJ cartridge. You can print the received color fax in memory
with BC-20 or BC-22e by memory reference function.
"INSTALL BC21e/20"
Cause:
You tried to make black copies with a BC-22e Photo BJ cartridge installed.
Solution: Remove the BC-22e Photo BJ cartridge and install the BC-20 Black or BC-21e
Color BJ cartridge.
Cause: You tried to print a received black & white fax, print areport, or print a black &
white document in memory with a BC-22e Photo BJ cartridge installed.
Solution:
Remove the BC-22e Photo BJ cartridge and install the BC-20 Black or BC-21e
Color BJ cartridge.
"LOAD PAPER" (#009)
Cause: The fax is out of paper.
Solution: Add more paper to the paper cassette. Make sure the stack is below the limit mark
and press the
Start/Scan or Resume button.
"MEMORY FULL" (#037)
Cause:
The fax's memory is full because it has received too many documents.
Solutions: (1) Print out any documents which are stored in memory. Then start
the operation again.
(2) If the memory contains any facsimiles you don't need, delete them.
(3) You cannot receive a fax was scanned with fine graphic images.
Cause:
The fax's memory is full because you tried to send too many pages at once.
Solution:
Divide the document and send each part separately.