Canon MultiPASS C530, Руководство по обслуживанию

Страница: 140 / 243

2-61
MultiPASS C530/C560 Chapter 2: Technical Reference
8.2.6 Explanation and parameters for each symbol used in BIH
The 0x of each parameter shows that the following integers are hexidecimal.
Symbol Meaning Parameter Reference
DL Initial layer to be transmitted 0x00 fixed
D Number of differential layers 0x00 fixed
P Number of bit planes 0x00 fixed
FILL Fill 0x00 fixed
XD Horizontal image size at layer D 0xXXXXXXXX Document width
(No. of bits)
YD Vertical image size at layer D 0xXXXXXXXX Document length
(No. of bits)
L0 Lines per stripe at the lowest resolution 0xXXXXXXXX Basically, 1 stripe is 128
lines (0x00000080).
Stripes with other
numbers of lines are
possible when the other
machine can receive in
option mode.
Mx Maximum horizontal offset 0xXX 0-127 pixels
allowed for AT pixel
My Maximum vertical offset allowed 0x00 fixed
for AT pixel
Order The order in which stripe data is Upper 4 bits 0
attached fixed
Option Option Upper 1 bit 0 fixed
DPTABLE Private DP table 0 or 1728 bytes
HITOLO Transmission order of differential layers 1 bit 0 fixed
SEQ Indication of progressive-compatible 1 bit 0 fixed
sequential coding
ILEAVE Interleaved transmission order of multiple 1 bit 0 fixed
bit plane
SMID Transmission order of stripes 1 bit 0 fixed
LRLTWO Number of reference lines 1 bit 0/1 0: 3 lines
0: 2 lines
VLENGTH Indication of possible use of NEWLEN 1 bit 0/1 Use of 0: NEWLEN
marker segment n not allowed
Use of 1: NEWLEN
allowed
TPDON Use of TP for Typical Prediction 1 bit 0 fixed
for differential layers
TPBON Use of TP for base layer 1 bit 0/1 0: OFF
1: ON
DPON Use of Deterministic Prediction 1 bit 0 fixed
DPPRIV Use of private DP table 1 bit 0 fixed Has meaning when
DPON is 1.
DPLAST Use of last DP table 1 bit 0 fixed Has meaning when
DPON is 1.