background image

Chapter 3

3-27

F-3-167

3) As you remove the bosses on both sides [1], lower the front part of the

power supply assembly [2]. Then pull it to remove the power supply

assembly.

F-3-168

3.5.1.13 Removing the Gear Unit

0012-1649

1) Remove the drive plate (small) [1].

- 2 screws [2]

F-3-169

2) Remove the 2 gears [1].

3) While freeing the claw, detach the gear unit [2].

F-3-170

3.5.1.14 Removing the Tooth-Missing Gear

0012-1650

1) Remove the gear support [1].

- 2 screws [2]

F-3-171

2) Remove the spring [1].

3) While freeing the claw, detach the tooth-missing gear [2].

F-3-172

3.5.2 Cassette Pickup Solenoid

3.5.2.1 Removing the Cassette

0012-1656

1) Remove the cassette by holding the cassette handle.

3.5.2.2 Removing the front cover

0012-1657

1) Open the front cover [1] and remove the arm claws [2] to disengage the

connection.

2) Remove the shafts on both sides [3] while warping the shaft arms inside,

and remove the front cover.

F-3-173

3.5.2.3 Removing the right cover

0012-1658

1) Remove the 2 screws [1] on the right cover.

F-3-174

2) Remove the right cover [1].

[1]

[2]

[2]

[3]

[1]

[1]

[2]

[2]

[1]

[2]

[1]

[2]

[1]

[2]

[1]

[1]

[3]

[3]

[2]

[1]

Содержание LaserBase MF3220 Series





























































































































Отзывы: