Canon LaserBase MF3220 Series, Руководство по обслуживанию

Страница: 74 / 124

Chapter 3
3-30
F-3-188
3.5.2.13 Removing the Cassette Pickup Solenoid
0012-1671
1) Place the main unit down on its front face (so that the interior of the main
unit is easily visible).
2) Remove the connector [1] on the ECNT board and take out the cable from
the cable guide.
3) Remove the cassette pickup solenoid [2] (behind the main motor).
- 1 screw [3]
F-3-189
3.5.3 Cassette Separation Pad
3.5.3.1 Removing the Cassette
0012-1674
1) Remove the cassette by holding the cassette handle.
3.5.3.2 Removing the Rear of the Cassette
0012-1676
1) Lift the rear of the cassette, and separate the rear from the front.
3.5.3.3 Removing the Cassette Separation Pad
0012-1677
1) Remove the shafts [1] on both sides of the lifting plate. Remove the lifting
plate [3] while watching the lifting plate spring [2] carefully.
F-3-190
2) Remove the 2 claws [1] on both sides of the cassette separation pad and
lift it up while watching the lifting plate spring [2] carefully. Ensure that
the separation pad spring does not get lost.
3) Remove both the plate and the cassette separation pad [3] by sliding them
to the left.
F-3-191
4) Remove the cassette separation pad [1] by sliding it upward.
- 2 claws [2]
F-3-192
3.5.4 Paper Feed Roller
3.5.4.1 Removing the Cassette
0012-1678
1) Remove the cassette by holding the cassette handle.
3.5.4.2 Removing the front cover
0012-1679
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
F-3-193
3.5.4.3 Removing the right cover
0012-1680
1) Remove the 2 screws [1] on the right cover.
F-3-194
2) Remove the right cover [1].
- 2 screws [2]
[1]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[1]
[3] [2]
[1]
[2]
[1]
[3]
[3]
[2]
[1]