background image

Chapter 3

3-3

2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.

F-3-14

3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.

- 2 screws [2]

F-3-15

3.1.3.7 Removing the top cover

0012-1432

1) Free the 2 claws [1], and remove the top cover [2].

- 2 screws [3]

F-3-16

3.1.4 Right Cover

3.1.4.1 Removing the Cassette

0012-1435

1) Remove the cassette by holding the cassette handle.

3.1.4.2 Removing the front cover

0012-1436

1) Open the front cover [1] and remove the arm claws [2] to disengage the

connection.

2) Remove the shafts on both sides [3] while warping the shaft arms inside,

and remove the front cover.

F-3-17

3.1.4.3 Removing the right cover

0012-1437

1) Remove the 2 screws [1] on the right cover.

F-3-18

2) Remove the right cover [1].

- 2 screws [2]

F-3-19

3.1.5 Left Cover

3.1.5.1 Removing the Cassette

0012-1439

1) Remove the cassette by holding the cassette handle.

3.1.5.2 Removing the left cover

0012-1442

1) Remove the 2 screws [1] on the left cover.

[2]

[5]

[4]

[1]

[3]

[1]

[2]

[2]

[3]

[1]

[1]

[1]

[3]

[3]

[2]

[1]

[2]

[1]

Содержание LaserBase MF3220 Series





























































































































Отзывы: