Canon LaserBase MF3220 Series, Руководство по обслуживанию

Страница: 86 / 124

Chapter 3
3-42
F-3-267
2) Remove the power supply shield plate [1].
- 9 screws [2]
F-3-268
3.6.1.12 Removing the Fixing Film Unit
0012-1746
1) Remove the fixing cover [1].
- 2 screws [2]
F-3-269
2) Remove the fixing entrance guide [1] by sliding it to the left and right.
- 2 screws [2]
F-3-270
3) Disengage the connector [1] of the power supply board.
4) Remove the grounding springs and the pressure springs [2] on both sides.
5) Remove the pressure plates [3] on both sides.
F-3-271
6) While holding the left and right frames [2] of the Fixing film unit [1], lift
it up at an angle and remove it.
F-3-272
3.6.2 Fixing Pressure Roller
3.6.2.1 Removing the Cassette
0012-1748
1) Remove the cassette by holding the cassette handle.
3.6.2.2 Removing the front cover
0012-1749
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
F-3-273
3.6.2.3 Removing the right cover
0012-1750
1) Remove the 2 screws [1] on the right cover.
[1]
[1] [1] [1]
[2]
[1]
[1]
[2]
[1]
[2]
[2]
[3]
[1]
[2]
[1]
[3]
[3]
[2]