Canon iR6570 series Скачать руководство пользователя страница 3

Страница: 3 / 684

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair

of products. This manual covers all localities where the products are sold. For this reason, there may be information in this

manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When

changes occur in applicable products or in the contents of this manual, Canon will release technical information as the need

arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition

of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered trademarks of the individual companies.

translated into another language, in whole or in part, without the written consent of Canon Inc.

Printed in Japan

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Содержание iR6570 series













































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание iR6570 series

Отзывы:

Canon iR6570 series, Руководство по обслуживанию, Страница: 3 / 684

Результаты поиска

Содержание iR6570 series

Отзывы: