Canon IR3250 Скачать руководство пользователя страница 72

Страница: 72 / 100

Communications Settings

4-29

Custom F

ax Settings

Setting the Unit Name (Unit Name)

You can set a Unit Name (i.e., a person’s name, company name, department name, etc.) that will be
printed on the fax paper at the destination end. (See “Setting Whether to Print Information on
Received Documents,” in the Reference Guide.)

NOTE

• For information about entering characters, see “Entering Characters Using the Touch Panel Display,” in

the User’s Guide

Call up the desired screen as follows:

key

→

[Communications Settings]

→

[Fax Settings]

→

[Unit Name]

Enter a unit name and press the [OK] key.

NOTE

• The Unit Name can have up to 24 characters.
• To use no Unit Name, press the [OK] key without

entering any characters.

• To delete the characters you have entered, press

the

key.

Press the [Done] key.

Repeat until the Additional Functions screen closes.

Additional

Functions

Clear

Содержание IR3250





































































































Результаты поиска

Содержание IR3250

Отзывы:

Похожие инструкции для IR3250

Бренды по названию

Популярные бренды

Canon IR3250, Справочное руководство

Результаты поиска

Содержание IR3250

Отзывы:

Похожие инструкции для IR3250

Бренды по названию

Популярные бренды