Canon iR3245, Руководство по устранению неисправностей

Страница: 73 / 300

Envelope Feeder Attachment-C2 (Optional) 2-15
2
Routine Maintenance
If the optional Copy Tray-J1 and Finisher-S1 are attached, envelopes are output to any output tray other than the
Copy Tray-J1, even if the Copy Tray-J1 is designated as the output tray destination.
If the optional Copy Tray-J1 and Inner 2 Way Tray-D1 are attached, envelopes are output to any output tray other
than the Copy Tray-J1, even if the Copy Tray-J1 is designated as the output tray destination.
If you are printing on envelopes, empty the output tray when up to 10 printed envelopes accumulate in the tray.
Envelopes should be stored in a place away from high-temperatures and humidity.
If there is a temperature difference between the location where the envelopes were stored and the location where
the envelopes are being printed, leave the envelopes in the printing location at room temperature before you use
them.
Correctly match the paper size dial, size switch, and Envelope Cassette settings in Common Settings (from the
Additional Functions screen) with the size of the envelopes being loaded. Failure to do so may cause paper jams,
dirty prints, or make the inside of the machine dirty.
The width guides on the envelope feeder attachment can be changed so that the following envelopes can be
loaded. Using envelopes other than these may result in paper jams, dirty prints, or make the inside of the machine
dirty.
- COM10 No.10: Mailwell No.582
- Monarch: Catalog
Glove No.8: Mailwell No.553
- DL: Mailwell/Schneidersone No.11345
- Yougata 4: Uzumaki Y-401
If you want to adjust the width guides to load ISO-C5 or ISO-B5 envelopes, contact your local authorized Canon
dealer.
•
•
•
•
•
•
•
•