Canon iR3245, Руководство по устранению неисправностей

Страница: 72 / 300

Envelope Feeder Attachment-C2 (Optional) 2-14
2
Routine Maintenance
Envelope Feeder Attachment-C2 (Optional)
This section explains how to use the optional Envelope Feeder Attachment-C2.
The optional Envelope Feeder Attachment-C2 can only be attached to Paper Drawer 1.
How to Use the Envelope Feeder Attachment
The following six types of envelopes can be loaded into the envelope feeder attachment: COM10
No.10, Monarch: Catalog Glove No.8, DL, ISO-B5, ISO-C5, and Yougata 4.
If you are using COM10 No. 10 envelopes, load them after checking the following:
Make sure that [COM10] is selected for ENV.1 in Common Settings (from the Additional Functions
screen).
The guides are adjusted to hold COM10 No. 10 envelopes.
The paper size dial is set to 'Env.', and the size switch is set to 'ENV.1'.
When you attach the envelope feeder attachment to the paper drawer, do not forcefully move the front guide of the
paper drawer in the wrong direction. Doing so may detach the envelope feeder attachment from the paper drawer.
Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints, or make the inside of the
machine dirty.
Do not load the following types of envelopes inside the envelope cassette. Doing so may cause paper jams, dirty
prints, or make the inside of the machine dirty.
Curled, creased, or folded envelopes
Very thick or thin envelopes
Damp or wet envelopes
Torn envelopes
Irregularly shaped envelopes
Envelopes with clasps or windows
Envelopes that have already been sealed
Envelopes with holes or perforations
Envelopes with specially coated surfaces
Envelopes made of surface treated colored paper
Envelopes that are self-sticking, which use ink, glue, or other substances that can melt, burn, vaporize, or emit
smells under the heat of a fixing unit (approximately 200°C). Depending on the materials used for the seal, the
glue may melt under the fixing unit's heat, sealing the envelopes.
•
•
•
•
•
•
-
-
-
-
-
-
-
-
-
-
-