Canon iR3245, Руководство по устранению неисправностей

Страница: 71 / 300

Paper Deck-Q1 (Optional) 2-13
2
Routine Maintenance
Paper which has been rolled or curled must be straightened out before loading it into the paper deck.
Make sure that the height of the paper stack does not exceed the loading limit mark (
) on the inside of
the paper deck.
The paper deck holds approximately 2,700 sheets of paper (80 g/m 2 ).
Load the paper stack in stages, adding approximately 500 sheets of paper (80 g/m 2 ) at a time. If the paper
deck can accommodate more paper, the lifter will descend.
Only load A4 paper into the paper deck. Paper cannot be loaded horizontally.
If there are instructions on the package of paper about which side of the paper to load, follow those
instructions.
When paper is loaded in the paper deck, the side facing down is the one printed on.
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it.
For more information on the print direction of preprinted paper (paper which has logos or patterns already
printed on it), see “Relationship between Original Orientation and Preprinted Paper Output Chart,” on p.
4-50.
4
Close the paper deck.
The inside lifter automatically rises, and the machine becomes ready for printing.
When closing the paper deck, be careful not to get your fingers caught, as this may result in
personal injury.
•
•
•
•
•
•
•
•
•