Canon iR2016 Series Скачать руководство пользователя страница 205

Страница: 205 / 232

Menu Descriptions

10-5

ine Setti

6. VOLUME CONTROL

Sets the volume for the alarm and monitor tones
that the machine sounds during a fax transmission.

1. MONITOR VOL. CTRL

Sets the volume to any level on a scale of 0 to 3
(1)*.

7. STANDARD SETTINGS

Sets the default for the Fax functions.

1. DENSITY

Sets the scan density.

STANDARD*

Suitable for standard documents.

Suitable for light documents.

Suitable for dark documents.

2. IMAGE QUALITY

Sets the fax resolution.

STANDARD*

Suitable for most text-only documents.

FINE

Suitable for fine-print documents.

PHOTO

Suitable for documents that contain photographs.

SUPER FINE

Suitable for documents that contain fine print and
images. (The resolution is four times that of
STANDARD.)

ULTRA FINE

Suitable for documents that contain fine print and
images. (The resolution is eight times that of
STANDARD.)

3. DIRECT TX

Enables/disables the direct sending.

OFF*

The machine disables the direct sending.

The machine enables the direct sending.

4. STAMP DOCUMENT

Enables/disables the stamp feature.

OFF*

The machine disables the stamp feature.

The machine enables the stamp feature.

8. INIT. FAX STD SET

Sets whether to restore the Standard Settings to
the factory default settings.

1. OFF*

Your settings will remain and not revert back to the
factory default settings.

2. ON

Will restore the Standard Settings to the factory
default settings.

Name

Descriptions

Содержание iR2016 Series









































































































































































































































Результаты поиска

Содержание iR2016 Series

Отзывы:

Canon iR2016 Series, Инструкция по факсимиле, Страница: 205 / 232

Результаты поиска

Содержание iR2016 Series

Отзывы: