Canon iR2016 Series, Инструкция по факсимиле

Страница: 48 / 232

Placing Originals 1-32
Bef
o
re Y
ou Star
t
Us
ing This Mac
h
ine
1
Placing Originals
Place your originals on the platen glass or into the feeder, depending on the size
and type of the original, and the send settings that you have specified.
■
Platen Glass
Place the originals on the platen glass when scanning bound originals such as books and
magazines on heavy or lightweight originals, and transparencies.
■
Feeder (DADF-P1)
Place the originals into the feeder when you want to scan several originals at the same
time, and press [Start].The machine automatically scans the originals. In addition, if you
set the Two-Sided Original mode, the both sides of a two-sided original can be scanned
without the need for turning over the sheet manually.
Document Sizes
If you place the original on the platen glass of the iR2016 model, or if the machine
cannot detect the original size, you should specify the original size after pressing
(Start). If the output paper in the recipient’s machine is not equal to the scanned
size, the original image may be reduced in size or divided into smaller parts before
it is sent.
Even the iR2020 cannot always detect the size of the original if it is a non standard
paper size, such as a book. In this case, specify the size at which you want to scan
the original. (See Chapter 1, “Basic Copying Features,” in the Copying Guide.)
Orientation
You can place an original either vertically or horizontally. Always align the top edge
of your original with the back edge of the platen glass (by the arrow in the top left
corner) or the back edge of the feeder.