Canon iPR C7010VP Series, Руководство по установке

Страница: 137 / 157

Chapter 2
2-92
F-2-386
6) Remove the shaft support [1].
- 2 screws [2]
F-2-387
7) Remove the Deck Pullout Roller [1], and remove the bearing [2].
- 1 E-ring [3]
F-2-388
8) Disconnect the connector [1].
9) Remove the grounding plate [2], and then remove the sintered bushing [3].
- 1 screw [4]
F-2-389
10) Remove the paper surface link [1] from the paper surface sensor flag [2].
11) Set up the paper surface detection arm [3] to remove it upward.
F-2-390
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[1]
[2]
[2]
[2]
[2] [2]
[1] [2] [3] [4]
[1]
[2]
[3]