Canon iPR C7010VP Series, Руководство по установке

Страница: 91 / 157

Chapter 2
2-46
8) Detach the secondary transfer end plate (rear) [1].
- 3 screws [2]
F-2-198
9) Detach the secondary transfer end plate (front) [1].
- Harness (3 wire saddles [2])
- 3 screws [3]
F-2-199
10) Remove the following parts.
- 1 E-ring [1]
- 1 gear [2]
- 1 dowel pin [3]
F-2-200
11) Remove the following parts.
- 8 E-rings [1]
- 8 washers [2]
- 8 bearings [3]
F-2-201
12) Detach the roller [1] as indicated by the arrows [A], [B] and [C] in this
order, and detach the 3 others in the same manner.
F-2-202
13) Detach the 4 fixing feed belts [1] in the direction of the arrow.
F-2-203
14) Detach the pre-fixing feed suction fan (front) [1] and the pre-fixing feed
suction fan (rear) [2].
- Harness (1 edge saddle [3], 1 wire saddle [4])
- 1 connector [5] each
- 2 screws [6] each
[1]
[2]
[1]
[2]
[3]
[3]
[2]
[1]
CAUTION:
When installing the Fixing Feed Belt Slave Roller, be sure to put the shorter
side [1] of the shaft on the front side.
[3]
[2]
[1]
[1]
[A]
[B]
[C]
[1]