Canon imageRUNNER C1325 Series, Руководство по обслуживанию

Страница: 526 / 607

8
8
8-87
8-87
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
TNNEWQCK Set new Tonr Cntner chck seq aftr rplce
Details To set whether to execute the new Toner Container check sequence
after replacement.
In case of processing a large job immediately after replacement of
the Toner Container when 0 is set, downtime due to the new Toner
Container check sequence occurs during the processing.
When 1 is set, control to print the specified number of sheets is turned
OFF and the new Toner Container check sequence is executed
immediately after the replacement.
Use case When downtime occurs due to the new Toner Container check sequence
during the processing of a large job
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Do not use this when the machine is operating correctly.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
R-DR-FAN Adj Right Door Unit Fan airflow amount
Details To set the rotation speed of the Right Door Unit Fan during printing.
When 2 is set, the heat exhaust efficiency is improved so it can alleviate
papers to be stuck together at the time of delivery. However, the
machine is more likely to shift to temperature rising prevention mode.
Use case When delivered papers stick together frequently
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
When 2 is set, the machine is more likely to shift to temperature rising
prevention mode.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
PWR-FAN Adj Power Supply Fan airflow amnt: stby
Details To adjust the airflow amount of the Power Supply Fan at standby.
As the value is larger, heat exhaust efficiency is improved, but noise
becomes louder.
Use case • When the machine is installed in a high temperature environment in
which damage of component parts of the Power Unit is likely to occur
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Noise becomes louder.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
Supplement/memo The Power Supply Fan also cools the Controller PCB.
COPIER> OPTION> FNC-SW
DLVY-FAN Adj Delivery Cooling Fan airflow amount
Details To set the rotation speed of the Delivery Cooling Fan during printing.
When 2 is set, the heat exhaust efficiency is improved so it can alleviate
papers to be stuck together at the time of delivery. However stacking
performance decreases.
Use case When delivered papers stick together frequently
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
When 2 is set, stacking performance at the time of delivery decreases.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
CRG-FANR Adj Drum-U Exhst Fan airflow amnt: print
Details To set the rotation speed of the Drum Unit Exhaust Fan during printing.
When 2 is set, the heat exhaust efficiency is improved so temperature
rising can be controlled. However, noise becomes louder.
Use case When the machine shifts to temperature rising prevention mode
frequently in case of continuous output for a long time
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Noise becomes louder.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
CRG-FANF Adj Drum-U Suctn Fan airflow amnt: print
Details To set the rotation speed of the Drum Unit Suction Fan during printing.
When 2 is set, the heat exhaust efficiency is improved so temperature
rising can be controlled. However, noise becomes louder.
Use case When the machine shifts to temperature rising prevention mode
frequently in case of continuous output for a long time
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Noise becomes louder.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0