Canon imageRUNNER C1325 Series, Руководство по обслуживанию

Страница: 512 / 607

8
8
8-73
8-73
Service Mode > COPIER > FUNCTION > PART-CHK
Service Mode > COPIER > FUNCTION > PART-CHK
COPIER> FUNCTION> PART-CHK
MTR Specification of operation Motor
Details To specify the Motor to operate.
Use case When replacing the Motor/checking the operation
Adj/set/operate method Enter the value, and then press Start key.
Display/adj/set range
1 to 23
1: CL Drum Motor (M01)
2: Bk Drum_ITB Motor (M02)
3: Developing Motor (M03)
4: Fixing Motor (M04)
5: Cassette 1_Multi-purpose Traty Pickup Motor (M05)
6: Pre-registration Motor (M06)
7: Registration Motor (M07)
8: Reverce Motor (M08)
9: Bottle Motor (YM) (M09)
10: Bottle Motor (CK) (M10)
11: Cassette 1 Lifter Motor (M11)
12: Cassette 2 Pickup Motor (M102)
13: Cassette 2 Pullout Motor (M106)
14: Cassette 2 Lifter Motor (M104)
15: Cassette 3, 4 Pickup Motor (M101)
16: Cassette 3, 4 Pullout Motor (M105)
17: Cassette 3, 4 Lifter Motor (M103)
18: Registration Motor (Waste Toner Container, Negative rotation
operation of M07)
19 to 23: Not used
Default value 1
Related service mode COPIER> FUNCTION> PART-CHK> MTR-ON
MTR-ON Operation check of Motor
Details To start operation check of the Motor specified by MTR.
The operation automatically stops after operation of 5 seconds.
Use case When replacing the Motor/checking the operation
Adj/set/operate method Select the item, and then press Start key.
Caution
While the Bottle Motor is active, be sure to remove the Toner Container.
Otherwise, toner leakage may occur in the machine.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> PART-CHK> MTR
SL Specification of operation Solenoid
Details To specify the Solenoid to operate.
Use case When replacing the Solenoid/checking the operation
Adj/set/operate method Enter the value, and then press Start key.
Display/adj/set range
1 to 3
1: Primary Transfer Disengagement Solenoid (SL01)
2: Duplex Solenoid (SL02)
3: Registration Shutter Solenoid (SL03)
Default value 1
Related service mode COPIER> FUNCTION> PART-CHK> SL-ON
COPIER> FUNCTION> PART-CHK
SL-ON Operation check of Solenoid
Details To start operation check for the Solenoid specified by SL.
The operation stops after “ON for 0.5 sec” => “OFF for 10 sec” => “ON
for 0.5 sec” => “OFF for 10 sec” => “ON for 0.5 sec”.
Use case When replacing the Solenoid/checking the operation
Adj/set/operate method Select the item, and then press Start key.
Display/adj/set range
During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> PART-CHK> SL
T-8-27