Canon imageRUNNER C1325 Series, Руководство по обслуживанию

Страница: 220 / 607

4
4
4-70
4-70
Disassembly/Assembly > Original Exposure/Feed System > Removing the Copyboard Glass Unit > Copyboard Glass Unit
Disassembly/Assembly > Original Exposure/Feed System > Removing the Copyboard Glass Unit > Copyboard Glass Unit
1) Open the ADF [1].
2) Remove the Copyboard Glass Unit [2].
• 6 Face Rubbers [3]
• 6 Screws [4]
6x
[1]
[3]
[3]
[3]
[4]
[3]
[4]
[4]
[4]
[4]
[2]
F-4-160
■
Copyboard Glass Unit
● Procedure of Replacement
1) Enter the value (White level data entry of white plate) indicated on the platen glass as
shown in the following service mode:
COPIER > ADJUST > CCD >
W-PLT-X W-PLT-Y W-PLT-Z
CAUTION:
Be sure to make the white plate data adjustment before ADF white level adjustment.
W-PLT-X
W-PLT-Y
W-PLT-Z
F-4-161
2) Write down the new numerical value in the service label.
3) Turn OFF/ON the main power switch.
4) Execute the Scan Unit white/black reference level adjustment (AGC).(Close the ADF)
COPIER > FUNCTION > CCD >
CL-AGC
5) Turn OFF/ON the main power switch.
6) After executing the shading position adjustment with the following service mdoe 1, check
the auto setting value with the following service mode 2 and write the value in the service
label.
No. COPIER > FUNCTION > INSTALL >
1 RDSHDPOS
No. COPIER > ADJUST > ADJ-XY >
2 ADJ-S
T-4-54
T-4-55
T-4-56
T-4-57