Canon imageRUNNER 2525 Series, Руководство по обслуживанию

Страница: 234 / 402

Back-Up
At time of shipment from the factory, all machines are adjusted individually, and adjustment values are recorded in their respective
service labels.
If you have replaced the CCD/CIS unit or the DC controller PCB, or if you have initialized the RAM, the adjustment values will
return to their default settings. If there has been any change in a service mode item, be sure to update its setting indicated on
the service label.
As necessary, make use of the space in the service label (as when recording an item not found on the label).
Service Label: behind the rear cover (right)
Service Label
The item of service kabel is described below.
In this machine, the output of the service label does not support.
FACTORY 1 2 3 FACTORY 1 2 3
034 xxx ADJ-X-MG xxx
035 xxx
036 xxx W-PLT-X xxx
037 xxx W-PLT-Y xxx
038 xxx W-PLT-Z xxx
054 xxx 50_RG xxx
136 xxx 50_GB xxx
140 xxx 100_RG xxx
141 xxx 100_GB xxx
142 xxx MTF3-M1 xxx
143 xxx MTF3-M2 xxx
145 xxx MTF3-M3 xxx
146 xxx MTF3-M4 xxx
147 xxx MTF3-M5 xxx
148 xxx MTF3-M6 xxx
149 xxx MTF3-M7 xxx
150 xxx MTF3-M8 xxx
㸡
SCAN> READER> ADJUST> ADJ-XY> MTF3-M9 xxx
ADJ-X xxx 㸡 SCAN> READER> ADJUST> PASCAL>
ADJ-Y xxx OFST-P-K xxx
ADJ-S xxx
㸡
SCAN> FEEDER> ADJUST>
ADJ-Y-DF xxx DOCST xxx
STRD-POS xxx LA-SPEED xxx
DOC-LNGH xxx
Body No
㸸
#PRINT> #PRINT NUMERIC>
㸡
SCAN> READER> ADJUST> ADJ-XY>
㸡
SCAN> READER> ADJUST> CCD>
8. Service Mode
224