Canon imageRunner 2022, Руководство по обслуживанию

Страница: 355 / 418

Chapter 15
15-33
15.7.2.21 <061:Adjustment of the registration loop volume. (Duplex unit)>
0017-8648
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
If there is a registration loop noise and abrasion while feeding the paper from the duplex unit, registration loop noise and abrasion could be reduced by adjusting
the volume of the registration loop. By making the value larger, loop volume will become bigger.
15.7.2.22 <062:Temperature adjustment UP/DOWN mode. (For plain paper)>
0017-8649
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
For plain paper relation, the volume of the temperature adjustment offset could be changed by 5 deg C at a time to aim the fixed temperature.
For plain paper relation : Normal, Normal Lo, rough paper Lo, thin post card, and OHP mode.
0 to 6: -35 to -5 deg C (1unit=5deg C)
7: 0 deg C
8 to 14: +5 to +35 deg C (1unit=5deg C)
15.7.2.23 <063:Temperature adjustment UP/DOWN mode. (For rough paper)>
0017-8650
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
For rough paper relation, the volume of the temperature adjustment offset could be changed by 5 deg C at a time to aim the fixed temperature.
For rough paper relation: rough paper, super rough paper, super rough paper H, post card, post card H, and envelope mode.
0 to 6: -35 to -5 deg C (1unit=5deg C)
7: 0 deg C
8 to 14: +5 to +35 deg C (1unit=5deg C)
15.7.2.24 <064:Mode for preventing the temperature rise of the end >
0017-8651
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set when the fixed film squeaks. Lower the target fixing temperatue and extend sheet-to-sheet time except A4/A3/11X17/LTR size.
0: Normal
1 to 5: Mode for responding film squeak. (reference to the table below)
T-15-25
15.7.2.25 <065:Mode for reducing sand image>
0017-8655
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set when sand image *1 has occurred on the print image.
Restraining the scatter of the toner by increasing the electric current of the AC electrification; the sand image could be reduced.
Sand image *1: Multiple black dots and white dots appear on half tone. Or multiple black dots appear on white background.
0: Normal.
1 to 3: Reducing mode. (Same operation to set 1 to 3)
There is a possibility that when using the "Reducing mode", the life of the drum will not meet the specified pieces.
15.7.2.26 <066:Temperature/ Humidity sensor fixed mode>
0017-8656
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Changing to high-pressure environment by using the temperature/ humidity sensor. But when there is an image trouble at the point of changing the environment,
fix the temperature and the humidity and do not allow the change of the high-pressure output.
0: Normal
1: Fixed environment of LL. (Temperature of 10 deg C and humidity of 10%)
2. Fixed environment of NN. (Temperature of 20 deg C and humidity of 50%)
3. Fixed environment of HH. (Temperature of 30 deg C and humidity of 80%)
15.7.3 Setting of Cassette (CST)
15.7.3.1 Special Standard-sized Paper Compatibility
0017-6174
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
With a special paper compatibility kit (cassette size adjuster) installed, set the cassette paper size lever to paper size groups U1 to U3 to set the paper sizes listed
below.
Setting Print temperature control Sheet-to-sheet temperature control Sheet-to-sheet time
1 Target temperature-10 deg C Print temperature control -20 deg C 0 sec extension
2 Target temperature-20 deg C Print temperature control -20 deg C 0 sec extension
3 Target temperature-10 deg C Print temperature control -20 deg C 10 sec extension
4 Target temperature-20 deg C Print temperature control -20 deg C 10 sec extension
5 Target temperature-30 deg C Print temperature control -20 deg C 15 sec extension
Paper size group Setting (*default) Paper name Marking
U1 0* Government LETTER G-LTR
29 Argentine LETTER A-LTR
31 Government LETTER G-LTR
40 8K 8K